Schedule Viewer
Last schedule upload: D3-R25005-00-RPL06 — 6139 activities — 04/16/2026 08:19 AM CT
RPL10 - GC LIVE SCHEDULE - Data Date 20260412.xer
· Uploaded Apr 16, 2026 12:51 PM
· 8408 activities
Experimental
Auto-populate checklist dates from schedule:
100
Activities Shown
0
Completed
0
In Progress
7
Critical
| Activity ID | Activity Name | WBS | Status | Start | Finish | Dur (d) | Rem (d) | % Comp | Float (d) |
|---|---|---|---|---|---|---|---|---|---|
RPL10.WP4.09060 |
RPL10.Conn NS1.CFD3 Pull/Install Trunk (192F) [FSW<>SSW] | Pull/Install Trunk & Multidrop Cable | Not Started | 09/15/26 | 09/22/26 | 7.5 | 7.5 |
|
92.5 |
RPL10.WP4.09780 |
RPL10.Conn NS1.CFD3 Pull/Install Trunk (384F) [RSW<>FSW] | Pull/Install Trunk & Multidrop Cable | Not Started | 09/15/26 | 09/22/26 | 7.5 | 7.5 |
|
72.5 |
RPL10.WP4.NS1.01520 |
RPL10.Conn NS1.CFD4 GSMDF <> Network Suites Management Trunks | Post ORv3 Rack | Not Started | 09/15/26 | 09/24/26 | 10.0 | 10.0 |
|
30.0 |
GCD.RPL10.3865 |
L3/L4 Start - NS1 Rows 1-8 | NS | Not Started | 09/16/26 | 09/16/26 | 0.0 | 0.0 |
|
82.5 |
GCD.RPL10.4805 |
L3/L4 Start - NS2 Rows 9-16 | NS | Not Started | 09/16/26 | 09/16/26 | 0.0 | 0.0 |
|
93.8 |
RPL10.CX.MCUP.01110 |
RPL10.CX.mCup Loop 2 - L3/L4 - mCUP - System Testing | mCup Loop 2 (mCup #2,#4,#6,#8) | Not Started | 09/16/26 | 09/29/26 | 12.5 | 12.5 |
|
372.5 |
RPL10.CX.NS1.01150 |
RPL10.CX.NS1 - L3/L4 - Elec. Domain 04/03 | NS1 ELECTRICAL | Not Started | 09/16/26 | 09/21/26 | 5.0 | 5.0 |
|
0.0 |
RPL10.CX.NS2.01580 |
RPL10.CX.NS2 - L3/L4 - Control Fault Domain 3 - TW Flush and Fill | NS2 Control Fault Domain 3 | Not Started | 09/16/26 | 09/25/26 | 10.0 | 10.0 |
|
-10.0 |
RPL10.EY.NS1.01400 |
RPL10.EY.NS1 - Cure for Remaining Equipment Pads (High Early Mix) | Build Back Exterior Leave Out Wall #1 (Tent Area) | Not Started | 09/16/26 | 09/22/26 | 8.8 | 8.8 |
|
42.5 |
RPL10.INT.NS2.01910 |
RPL10.Interior.NS2 - Control Fault Domain 1 SQ6.2 - Install Mechanical Side Aisle Cable Tray | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/16/26 | 10/13/26 | 25.0 | 25.0 |
|
-2.5 |
RPL10.INT.NS2.01940 |
RPL10.Interior.NS2 - Control Fault Domain 1 SQ6.2 - Install copper from GS.IDF to BMS and EPMS panels (UG from Corr IDF) | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/16/26 | 10/13/26 | 25.0 | 25.0 |
|
-27.5 |
RPL10.INT.SSB.01610 |
RPL10.Interior.SSB - BoW - Final Punch Walk | Balance of Walls and OverHead | Not Started | 09/16/26 | 09/17/26 | 2.5 | 2.5 |
|
113.8 |
RPL10.WP2.GSIDF.1060 |
RPL10.Conn GSIDFN11 Install & Test Network (FIM) | Network | Not Started | 09/16/26 | 09/18/26 | 3.8 | 3.8 |
|
122.5 |
RPL10.WP2.GSIDF.3020 |
RPL10.Conn GSIDFN11 Install Copper, WAPs, Security Camera & Access Control | Cabling | Not Started | 09/16/26 | 10/01/26 | 15.0 | 15.0 |
|
370.0 |
RPL10.WP4.016600 |
RPL10.Conn NS1.CFD4.19 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [MA<>JXSW] | Not Started | 09/16/26 | 09/17/26 | 2.5 | 2.5 |
|
83.8 |
RPL10.WP4.016760 |
RPL10.Conn NS1.CFD4.48<>11-15 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/16/26 | 09/17/26 | 2.5 | 2.5 |
|
78.8 |
RPL10.WP4.02420 |
RPL10.Conn NS1.CFD2.39 Pull Duplex Jumper (LC<>LC) [MA<>JXSW] | Pull Duplex Jumper [MA<>JXSW] | Not Started | 09/16/26 | 09/18/26 | 3.8 | 3.8 |
|
83.8 |
RPL10.WP4.029700 |
RPL10.Conn NS4.CFD1.48<>21-25 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/16/26 | 09/21/26 | 5.0 | 5.0 |
|
162.5 |
RPL10.WP4.NS1.01360 |
RPL10.Conn NS1.CFD5 Network Suite Management and Console In - Row Cabling - PON | Post ORv3 Rack | Not Started | 09/16/26 | 09/25/26 | 10.0 | 10.0 |
|
23.8 |
RPL10.CX.NS2.01130 |
RPL10.CX.NS2 - L3/L4 - Control Fault Domain 4 | NS2 Control Fault Domain 4 | Not Started | 09/17/26 | 10/08/26 | 20.0 | 20.0 |
|
17.5 |
RPL10.INT.SSBC.01160 |
RPL10.Interior.SSB-Corridor - OFE - Remaining NS2 Equipment (1x GS.IDF) N21 (08.26.26) | OFE | Not Started | 09/17/26 | 09/23/26 | 6.2 | 6.2 |
|
-25.0 |
RPL10.SSBC.BB.2840 |
RPL10.Int.Build Back.SSB-Corr - LO #5 - Arch Finishes - Hang Drywall, Paint, Final Finishes (OFE Room Closing) | Build Back Interior Leave Out Wall #5 (NS2) | Not Started | 09/17/26 | 10/07/26 | 18.8 | 18.8 |
|
53.8 |
RPL10.W3B.FE.011031 |
RPL10.Conn EF1B<>NS2.CFD3 (P2-3) Pull Fiber Trunk (288F) [EF<>JXSW] | EF1B<>NS2.4 (P2-3) [EF<>JXSW] | Not Started | 09/17/26 | 09/23/26 | 6.2 | 6.2 |
|
23.8 |
RPL10.W3B.FE.011706 |
RPL10.Conn EF2F<>NS1.CFD1 (P1-4) Pull Fiber Trunk (384F) [EF<>SSW] | EF2F<>NS1.6 (P1-4) [EF<>SSW] | Not Started | 09/17/26 | 09/18/26 | 2.5 | 2.5 |
|
60.0 |
RPL10.W3B.FE.011726 |
RPL10.Conn EF2F<>NS2.CFD3 (P1-4) Pull Fiber Trunk (384F) [EF<>SSW] | EF2F<>NS2.4 (P1-4) [EF<>SSW] | Not Started | 09/17/26 | 09/18/26 | 2.5 | 2.5 |
|
28.8 |
RPL10.WP3A.EF1B.1100 |
RPL10.Conn EF1B(OPE)<>EF2F(MBOX) Pull/Install/Test OSP Cabling (for RPL07) - P1 | EF1B<>EF2F | Not Started | 09/17/26 | 09/30/26 | 12.5 | 12.5 |
|
133.8 |
RPL10.WP3A.EF1B.1145 |
RPL10.Conn EF1B(OPE)<>EF2B(MBOX) Pull/Install/Test OSP Cabling (for RPL07) - P2 | EF1B<>EF2B | Not Started | 09/17/26 | 09/28/26 | 10.0 | 10.0 |
|
153.8 |
RPL10.WP3A.EF1F.1150 |
RPL10.Conn EF1F(OPE)<>EF2B(MBOX) Pull/Install/Test OSP Cabling (for RPL06) - P3 | EB1F<>EF2B | Not Started | 09/17/26 | 09/30/26 | 12.5 | 12.5 |
|
158.8 |
RPL10.WP3A.EF2B.1010 |
RPL10.Conn EF2B(LIU)<>EF1F(MBOX) Pull/Install/Test OSP Cabling (for RPL05) - P3 | EF2B<>EF1F | Not Started | 09/17/26 | 09/30/26 | 12.5 | 12.5 |
|
158.8 |
RPL10.WP3A.EF2B.1145 |
RPL10.Conn EF2B(OPE)<>EF2B(MBOX) Pull/Install/Test OSP Cabling (for RPL09) - P2 | EF2B<>EF2B | Not Started | 09/17/26 | 09/22/26 | 5.0 | 5.0 |
|
168.8 |
RPL10.WP3A.EF2F.1055 |
RPL10.Conn EF2F(LIU)<>EF1B(MBOX) Pull/Install/Test OSP Cabling (for RPL03) - P4 | EF2F<>EF1B | Not Started | 09/17/26 | 09/30/26 | 12.5 | 12.5 |
|
121.2 |
RPL10.WP3A.EF2F.1145 |
RPL10.Conn EF2F(OPE)<>EF2B(MBOX) Pull/Install/Test OSP Cabling (for RPL08) - P2 | EF2F<>EF2B | Not Started | 09/17/26 | 09/24/26 | 7.5 | 7.5 |
|
161.2 |
RPL10.WP3B.FE.08060 |
RPL10.Conn EF2F<>NS2.CFD3 (P1-4) Pull/Install/Test - WBS Summary | EF2F<>NS2.4 (P1-4) [EF<>SSW] | Not Started | 09/17/26 | 10/14/26 | 25.0 | 25.0 |
|
18.8 |
RPL10.WP3B.FE.08120 |
RPL10.Conn EF1B<>NS2.CFD3 (P2-3) Pull/Install/Test - WBS Summary | EF1B<>NS2.4 (P2-3) [EF<>JXSW] | Not Started | 09/17/26 | 10/19/26 | 28.8 | 28.8 |
|
17.5 |
RPL10.WP3B.FE.08940 |
RPL10.Conn EF2F<>NS1.CFD1 (P1-4) Pull/Install/Test - WBS Summary | EF2F<>NS1.6 (P1-4) [EF<>SSW] | Not Started | 09/17/26 | 11/10/26 | 48.8 | 48.8 |
|
18.8 |
RPL10.WP4.018160 |
RPL10.Conn NS2.CFD5.14 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/17/26 | 09/18/26 | 2.5 | 2.5 |
|
101.2 |
RPL10.WP4.018320 |
RPL10.Conn NS2.CFD5.48<>26-30 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 09/17/26 | 09/18/26 | 2.5 | 2.5 |
|
96.2 |
RPL10.WP4.029880 |
RPL10.Conn NS4.CFD2.48<>16-20 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/17/26 | 09/22/26 | 5.0 | 5.0 |
|
156.2 |
RPL10.WP4.031080 |
RPL10.Conn NS3.CFD2.48<>16-20 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/17/26 | 09/22/26 | 5.0 | 5.0 |
|
168.8 |
RPL10.WP4.032280 |
RPL10.Conn NS1.CFD4.22 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/17/26 | 09/18/26 | 2.5 | 2.5 |
|
90.0 |
RPL10.WP4.032360 |
RPL10.Conn NS1.CFD3.26 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/17/26 | 09/18/26 | 2.5 | 2.5 |
|
80.0 |
RPL10.Conn.MS.01050 |
CorpNet & FacNet Available - NS1 | Network Suite 1 | Not Started | 09/18/26 | 09/18/26 | 0.0 | 0.0 |
|
122.5 |
RPL10.EY.EF2.01490 |
RPL10.EY.EF2 - Install RPL-3 FSP Interior Cable Trays | Fiber Support Platform - RPL-3 | Not Started | 09/18/26 | 10/05/26 | 15.0 | 15.0 |
|
167.5 |
RPL10.EY.NS1.01390 |
RPL10.EY.NS1 - Install Remaning EY Paving | Hardscape and Landscape | Not Started | 09/18/26 | 09/24/26 | 6.2 | 6.2 |
|
93.8 |
RPL10.EY.NS1.01410 |
RPL10.EY.NS1 - Install Remaining Electrical Panels (3) | Build Back Exterior Leave Out Wall #1 (Tent Area) | Not Started | 09/18/26 | 09/24/26 | 6.2 | 6.2 |
|
31.2 |
RPL10.INT.NS4.01240 |
RPL10.Interior.NS4 - Control Fault Domain 1 SQ7.1 - Install copper from GS.IDF to BMS and EPMS panels | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/18/26 | 10/15/26 | 25.0 | 25.0 |
|
48.8 |
RPL10.INT.NS4.01360 |
RPL10.Interior.NS4 - Control Fault Domain 2 SQ8.1 - Install Mechanical Side Aisle Cable Tray | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/18/26 | 10/15/26 | 25.0 | 25.0 |
|
40.0 |
RPL10.INT.NS4.02640 |
RPL10.Interior.NS4 - OFE - Control Fault Domain 3 SQ9.1 (Mech Side Aisle) | OFE NS4 Control Fault Domain 3 | Not Started | 09/18/26 | 09/29/26 | 10.0 | 10.0 |
|
42.5 |
RPL10.INT.SSBC.03560 |
RPL10.Ext.Build Back.SSB-Corr - LO #1 - Install Remaining GS MDF Mechanical (10.N1.03) | Build Back Exterior Leave Out Wall #1 (Tent Area) | Not Started | 09/18/26 | 09/28/26 | 8.8 | 8.8 |
|
40.0 |
RPL10.OFCI.7220 |
OFCI - Delivery ROJ: FE Fiber for CFD NS3.3 (ROJ ) (RVCD ) | NS3 | Not Started | 09/18/26 | 10/08/26 | 18.8 | 18.8 |
|
97.5 |
RPL10.W3B.FE.012001 |
RPL10.Conn EF1B<>NS2.CFD4 (P2-3) Install Fiber Trunk (384F) [EF<>SSW] | EF1B<>NS2.3 (P2-3) [EF<>SSW] | Not Started | 09/18/26 | 09/21/26 | 2.5 | 2.5 |
|
11.2 |
RPL10.W3B.FE.012496 |
RPL10.Conn EF2F<>NS1.CFD3 (P1-4) Install Fiber Trunk (384F) [EF<>SSW] | EF2F<>NS1.4 (P1-4) [EF<>SSW] | Not Started | 09/18/26 | 09/21/26 | 2.5 | 2.5 |
|
18.8 |
RPL10.W3B.FE.012626 |
RPL10.Conn EF1B<>NS2.CFD4 (P2-3) Test Fiber Trunk (288F) [EF<>JXSW] | EF1B<>NS2.3 (P2-3) [EF<>JXSW] | Not Started | 09/18/26 | 09/21/26 | 2.5 | 2.5 |
|
22.5 |
RPL10.W3B.FE.013091 |
RPL10.Conn EF2F<>NS1.CFD3 (P1-4) Test Fiber Trunk (288F) [EF<>JXSW] | EF2F<>NS1.4 (P1-4) [EF<>JXSW] | Not Started | 09/18/26 | 09/21/26 | 2.5 | 2.5 |
|
26.2 |
RPL10.WP4.011620 |
RPL10.Conn NS1.CFD6 Pull/Install In-Row Trunk (24F) [MA<>EB] | [MA<>EB] | Not Started | 09/18/26 | 09/24/26 | 6.2 | 6.2 |
|
52.5 |
RPL10.WP4.016620 |
RPL10.Conn NS1.CFD4.20 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [MA<>JXSW] | Not Started | 09/18/26 | 09/21/26 | 2.5 | 2.5 |
|
83.8 |
RPL10.WP4.016780 |
RPL10.Conn NS1.CFD4.48<>16-20 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/18/26 | 09/21/26 | 2.5 | 2.5 |
|
78.8 |
RPL10.WP4.029480 |
RPL10.Conn NS2.CFD1.48<>16-20 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/18/26 | 09/23/26 | 5.0 | 5.0 |
|
56.2 |
RPL10.WP4.03880 |
RPL10.Conn NS2.CFD3.29 Pull Duplex Jumper (LC<>LC) [MA<>JXSW] | Pull Duplex Jumper [MA<>JXSW] | Not Started | 09/18/26 | 09/22/26 | 3.8 | 3.8 |
|
85.0 |
RPL10.WP4.04240 |
RPL10.Conn NS2.CFD2.37 Pull Duplex Jumper (LC<>LC) [MA<>JXSW] | Pull Duplex Jumper [MA<>JXSW] | Not Started | 09/18/26 | 09/22/26 | 3.8 | 3.8 |
|
85.0 |
RPL10.WP4.NS1.03620 |
RPL10.Conn NS1.CFD1 Infrastructure - WBS Summary | Infrastructure | Not Started | 09/18/26 | 09/23/26 | 5.0 | 5.0 |
|
68.8 |
RPL10.WP4.NS1.03660 |
RPL10.Conn NS1.CFD1 Infrastructure | Infrastructure | Not Started | 09/18/26 | 09/23/26 | 5.0 | 5.0 |
|
68.8 |
GCD.RPL10.6225 |
L3/L4 Finish EF1 - RPL10 | EF1 | Not Started | 09/21/26 | 09/21/26 | 0.0 | 0.0 |
|
380.0 |
RPL10.INT.SSBC.01530 |
RPL10.Int.Build Back.SSB-Corr - LO #1 - Remaining NS1 L2 Checklist Completion | Build Back Interior Leave Out Wall #1 (NS1) | Not Started | 09/21/26 | 09/25/26 | 6.2 | 6.2 |
|
70.0 |
RPL10.WP3A.EF1B.1035 |
RPL10.Conn EF1B(OPE)<>EF1F(MBOX) Pull/Install/Test OSP Cabling (for RPL07) - P4 | EF1B<>EF1F | Not Started | 09/21/26 | 09/28/26 | 7.5 | 7.5 |
|
173.8 |
RPL10.WP3A.EF2F.1020 |
RPL10.Conn EF2F(OPE)<>EF1F(MBOX) Pull/Install/Test OSP Cabling (for RPL08) - P1 | EF2F<>EF1F | Not Started | 09/21/26 | 09/30/26 | 10.0 | 10.0 |
|
141.2 |
RPL10.WP4.018180 |
RPL10.Conn NS2.CFD5.15 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/21/26 | 09/22/26 | 2.5 | 2.5 |
|
101.2 |
RPL10.WP4.018340 |
RPL10.Conn NS2.CFD5.48<>31-35 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 09/21/26 | 09/22/26 | 2.5 | 2.5 |
|
96.2 |
RPL10.WP4.02440 |
RPL10.Conn NS1.CFD2.40 Pull Duplex Jumper (LC<>LC) [MA<>JXSW] | Pull Duplex Jumper [MA<>JXSW] | Not Started | 09/21/26 | 09/23/26 | 3.8 | 3.8 |
|
83.8 |
RPL10.WP4.032300 |
RPL10.Conn NS1.CFD4.23 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/21/26 | 09/22/26 | 2.5 | 2.5 |
|
90.0 |
RPL10.WP4.032380 |
RPL10.Conn NS1.CFD3.27 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/21/26 | 09/22/26 | 2.5 | 2.5 |
|
80.0 |
GCD.RPL10.3885 |
L3/L4 Start - NS1 Rows 41-48 | NS | Not Started | 09/22/26 | 09/22/26 | 0.0 | 0.0 |
|
77.5 |
GCD.RPL10.4825 |
L3/L4 Start - NS2 Rows 1-8 | NS | Not Started | 09/22/26 | 09/22/26 | 0.0 | 0.0 |
|
111.2 |
GCD.RPL10.6005 |
[RPL10] TC Ready: Production Cabling Pathways Complete [NS2 Rows 33-40] | TC Ready: Production Cabling - NS2 | Not Started | 09/22/26 | 09/22/26 | 0.0 | 0.0 |
|
37.5 |
RPL10.CX.EF1.01030 |
RPL10.CX.EF1 - L5 IST | EF1 | Not Started | 09/22/26 | 10/05/26 | 12.5 | 12.5 |
|
87.5 |
RPL10.CX.NS1.01170 |
RPL10.CX.NS1 - L3/L4 - Elec. Domain 02/01 | NS1 ELECTRICAL | Not Started | 09/22/26 | 09/25/26 | 5.0 | 5.0 |
|
5.0 |
RPL10.CX.NS1.01520 |
RPL10.CX.NS1 - L3/L4 - Control Fault Domain 2 - TW Flush and Fill | NS1 Control Fault Domain 2 | Not Started | 09/22/26 | 10/01/26 | 10.0 | 10.0 |
|
0.0 |
RPL10.W3B.FE.011811 |
RPL10.Conn EF1B<>NS1.CFD3 (P2-3) Install Fiber Trunk (288F) [EF<>JXSW] | EF1B<>NS1.4 (P2-3) [EF<>JXSW] | Not Started | 09/22/26 | 09/24/26 | 3.8 | 3.8 |
|
18.8 |
RPL10.W3B.FE.012226 |
RPL10.Conn EF1F<>NS2.CFD4 (P2-3) Install Fiber Trunk (288F) [EF<>JXSW] | EF1F<>NS2.3 (P2-3) [EF<>JXSW] | Not Started | 09/22/26 | 09/24/26 | 3.8 | 3.8 |
|
11.2 |
RPL10.W3B.FE.012801 |
RPL10.Conn EF1B<>NS2.CFD4 (P2-3) Test Fiber Trunk (384F) [EF<>SSW] | EF1B<>NS2.3 (P2-3) [EF<>SSW] | Not Started | 09/22/26 | 09/23/26 | 2.5 | 2.5 |
|
22.5 |
RPL10.W3B.FE.013296 |
RPL10.Conn EF2F<>NS1.CFD3 (P1-4) Test Fiber Trunk (384F) [EF<>SSW] | EF2F<>NS1.4 (P1-4) [EF<>SSW] | Not Started | 09/22/26 | 09/23/26 | 2.5 | 2.5 |
|
26.2 |
RPL10.WP4.016640 |
RPL10.Conn NS1.CFD4.21 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [MA<>JXSW] | Not Started | 09/22/26 | 09/23/26 | 2.5 | 2.5 |
|
83.8 |
RPL10.WP4.016800 |
RPL10.Conn NS1.CFD4.48<>21-25 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/22/26 | 09/23/26 | 2.5 | 2.5 |
|
78.8 |
RPL10.WP4.029720 |
RPL10.Conn NS4.CFD1.48<>26-30 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/22/26 | 09/25/26 | 5.0 | 5.0 |
|
162.5 |
RPL10.WP4.030820 |
RPL10.Conn NS3.CFD1.48<>03-05 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/22/26 | 09/23/26 | 2.5 | 2.5 |
|
152.5 |
RPL10.WP4.09040 |
RPL10.Conn NS1.CFD4 Pull/Install/Test Trunk (192F) [MA<>JXSW] | Pull/Install Trunk & Multidrop Cable | Not Started | 09/22/26 | 10/05/26 | 12.5 | 12.5 |
|
81.2 |
RPL10.WP4.NS3.01060 |
RPL10.Conn NS3.CFD1 Network - WBS Summary | Network | Not Started | 09/22/26 | 01/12/27 | 95.0 | 95.0 |
|
125.0 |
GCD.RPL10.5325 |
L3/L4 Start EY - NS3 | EY | Not Started | 09/23/26 | 09/23/26 | 0.0 | 0.0 |
|
202.5 |
RPL.10.D.X3830.XR |
100MW (40 MW Initial , 60 MW later)Cx Temp Power to MV Skids RPL10 NS3 Available | Power (XREFs) | Not Started | 09/23/26 | 09/23/26 | 0.0 | 0.0 |
|
61.2 |
RPL10.CX.NS3.01000 |
RPL10.CX.NS3 - L3, L4, IST - WBS Summary | NS3 | Not Started | 09/23/26 | 07/12/27 | 248.8 | 248.8 |
|
1587.5 |
RPL10.CX.NS3.01010 |
RPL10.CX.NS3 - L3/L4 - WBS Summary (Electrical) | NS3 ELECTRICAL | Not Started | 09/23/26 | 02/22/27 | 127.5 | 127.5 |
|
67.5 |
RPL10.CX.NS3.01020 |
RPL10.CX.NS3 - L3/L4 - MV Skids (8) Loop 3 | NS3 ELECTRICAL | Not Started | 09/23/26 | 10/02/26 | 10.0 | 10.0 |
|
61.2 |
RPL10.EY.NS2.01370 |
RPL10.EY.NS2 - Demo of Tent SOG | Tent and Temp Conditions | Not Started | 09/23/26 | 09/29/26 | 6.2 | 6.2 |
|
13.8 |
RPL10.INT.NS2.01750 |
RPL10.Conn NS2.CFD2 - Set Passive Racks for WP3B | Infrastructure | Not Started | 09/23/26 | 09/25/26 | 3.8 | 3.8 |
|
33.8 |
RPL10.INT.NS2.01950 |
RPL10.Interior.NS2 - Control Fault Domain 1 SQ6.2 - L2 Checklist Completion | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/23/26 | 10/20/26 | 25.0 | 25.0 |
|
-27.5 |
RPL10.INT.NS2.03005 |
RPL10.Conn NS2.CFD2 - Set Passive Racks for PON | Infrastructure | Not Started | 09/23/26 | 09/25/26 | 3.8 | 3.8 |
|
78.8 |
RPL10.INT.NS3.01140 |
RPL10.Interior.NS3 - Control Fault Domain 1 SQ7.2 - Install Vesda / FA | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/23/26 | 10/20/26 | 25.0 | 25.0 |
|
51.2 |
RPL10.INT.NS3.01150 |
RPL10.Interior.NS3 - Control Fault Domain 1 SQ7.2 - Install FW | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/23/26 | 10/20/26 | 25.0 | 25.0 |
|
37.5 |
RPL10.INT.NS3.01990 |
RPL10.Interior.NS3 - Control Fault Domain 1 SQ7.2 - Install TW | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/23/26 | 10/20/26 | 25.0 | 25.0 |
|
37.5 |
RPL10.INT.NS3.02540 |
RPL10.Interior.NS3 - OFE - Control Fault Domain 1 SQ7.2 (Mech Side Aisle) | OFE NS3 Control Fault Domain 1 | Not Started | 09/23/26 | 09/23/26 | 1.2 | 1.2 |
|
37.5 |