Schedule Viewer
Last schedule upload: D3-R25005-00-RPL10 — 9281 activities — 06/03/2026 08:35 AM CT
RPL10 - GC LIVE SCHEDULE - Data Date 20260524.xer
· Uploaded Jun 03, 2026 01:35 PM
· 9281 activities
Experimental
Auto-populate checklist dates from schedule:
100
Activities Shown
0
Completed
0
In Progress
1
Critical
| Activity ID | Activity Name | WBS | Status | Start | Finish | Dur (d) | Rem (d) | % Comp | Float (d) |
|---|---|---|---|---|---|---|---|---|---|
RPL10.WP2.GSIDF.2700 |
RPL10.Conn GSIDFNX09 Install & Test Network (FIM) | Network | Not Started | 09/08/26 | 09/10/26 | 3.8 | 3.8 |
|
130.0 |
RPL10.WP2.GSIDF.3420 |
RPL10.Conn GSIDFNX08 Install Copper, WAPs, Security Camera & Access Control | Cabling | Not Started | 09/08/26 | 09/10/26 | 3.8 | 3.8 |
|
388.8 |
RPL10.WP2.GSIDF.3440 |
RPL10.Conn GSIDFNX09 Install Copper, WAPs, Security Camera & Access Control | Cabling | Not Started | 09/08/26 | 09/10/26 | 3.8 | 3.8 |
|
388.8 |
RPL10.WP3A.EF1B.1020 |
RPL10.Conn EF1B(OPE)<>EF1F(MBOX) Pull/Install/Test OSP Cabling (for RPL07) - P1 | EF1B<>EF1F | Not Started | 09/08/26 | 09/15/26 | 7.5 | 7.5 |
|
162.5 |
RPL10.WP3A.EF1B.1070 |
RPL10.Conn EF1B(OPE)<>EF1B(MBOX) Pull/Install/Test OSP Cabling (for RPL07) - P3 | EF1B<>EF1B | Not Started | 09/08/26 | 09/11/26 | 5.0 | 5.0 |
|
182.5 |
RPL10.WP3A.EF1B.1135 |
RPL10.Conn EF1B(LIU)<>EF2B(MBOX) Pull/Install/Test OSP Cabling (for RPL02) - P4 | EF1B<>EF2B | Not Started | 09/08/26 | 09/17/26 | 10.0 | 10.0 |
|
142.5 |
RPL10.WP3A.EF2B.1125 |
RPL10.Conn EF2B(LIU)<>EF2B(MBOX) Pull/Install/Test OSP Cabling (for RPL05) - P2 | EF2B<>EF2B | Not Started | 09/08/26 | 09/11/26 | 5.0 | 5.0 |
|
157.5 |
RPL10.WP3B.FE.09160 |
RPL10.Conn EF2B<>NS2.CFD2 (P1-4) Pull/Install/Test - WBS Summary | EF2B<>NS2.5 (P1-4) [EF<>SSW] | Not Started | 09/08/26 | 10/23/26 | 42.5 | 42.5 |
|
25.0 |
RPL10.WP4.016540 |
RPL10.Conn NS1.CFD5.48<>46-49 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/08/26 | 09/09/26 | 2.5 | 2.5 |
|
103.8 |
RPL10.WP4.029980 |
RPL10.Conn NS4.CFD2.48<>41-44 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/08/26 | 09/09/26 | 2.5 | 2.5 |
|
187.5 |
RPL10.WP4.030080 |
RPL10.Conn NS4.CFD3.48<>16-20 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/08/26 | 09/11/26 | 5.0 | 5.0 |
|
165.0 |
RPL10.WP4.031180 |
RPL10.Conn NS3.CFD2.48<>41-44 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/08/26 | 09/09/26 | 2.5 | 2.5 |
|
200.0 |
RPL10.WP4.032300 |
RPL10.Conn NS1.CFD4.23 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/08/26 | 09/09/26 | 2.5 | 2.5 |
|
101.2 |
RPL10.WP4.032380 |
RPL10.Conn NS1.CFD3.27 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/08/26 | 09/09/26 | 2.5 | 2.5 |
|
91.2 |
RPL10.WP4.032760 |
RPL10.Conn NS2.CFD5.14 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/08/26 | 09/09/26 | 2.5 | 2.5 |
|
110.0 |
RPL10.WP4.032840 |
RPL10.Conn NS2.CFD4.18 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/08/26 | 09/09/26 | 2.5 | 2.5 |
|
100.0 |
RPL10.WP4.06660 |
RPL10.Conn NS4.CFD1.48<>26-30 Pull Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 09/08/26 | 09/11/26 | 5.0 | 5.0 |
|
202.5 |
RPL10.WP4.06680 |
RPL10.Conn NS4.CFD1.48<>31-35 Pull Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 09/08/26 | 09/11/26 | 5.0 | 5.0 |
|
205.0 |
RPL10.CBL.NIDF.02990 |
RPL10.Conn NS4.CFD1 (FE) ISP Cabling - WBS Summary | FENW (Front End Network) | Not Started | 09/09/26 | 09/24/26 | 15.0 | 15.0 |
|
88.8 |
RPL10.CX.CTRC.01020 |
RPL10.CX.Center COR - L4 | Center Corridor | Not Started | 09/09/26 | 09/22/26 | 12.5 | 12.5 |
|
86.2 |
RPL10.CX.CTRC.01030 |
RPL10.CX.Center COR - L3/L4 Remaining Electrical Equipment | Center Corridor | Not Started | 09/09/26 | 09/15/26 | 6.2 | 6.2 |
|
92.5 |
RPL10.CX.CTRC.01040 |
RPL10.CX.Center COR - L3/L4 Remaining Mechanical Equipment | Center Corridor | Not Started | 09/09/26 | 09/15/26 | 6.2 | 6.2 |
|
92.5 |
RPL10.INT.NS4.01500 |
RPL10.Interior.NS4 - Control Fault Domain 3 SQ9.1 - Install Mechanical Side Aisle Cable Tray | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/09/26 | 10/06/26 | 25.0 | 25.0 |
|
73.8 |
RPL10.INT.NS4.01520 |
RPL10.Interior.NS4 - Control Fault Domain 3 SQ9.1 - Install copper from GS.IDF to BMS and EPMS panels (UG from Center ID | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/09/26 | 10/06/26 | 25.0 | 25.0 |
|
82.5 |
RPL10.ORV3.010220 |
OFE - Delivery ROJ: ORv3 for CFD NS2.2 (ROJ 10.12.26) (RVCD 11.05.26) | NS2 | Not Started | 09/09/26 | 09/29/26 | 18.8 | 18.8 |
|
-1.2 |
RPL10.SSBC.BB.1840 |
RPL10.Ext.Build Back.SSB-Corr - LO #1 - Install Frame, Doors, Hardware | Build Back Exterior Leave Out Wall #1 (Tent Area) | Not Started | 09/09/26 | 09/10/26 | 2.5 | 2.5 |
|
57.5 |
RPL10.W3B.FE.011031 |
RPL10.Conn EF1B<>NS2.CFD3 (P2-3) Pull Fiber Trunk (288F) [EF<>JXSW] | EF1B<>NS2.4 (P2-3) [EF<>JXSW] | Not Started | 09/09/26 | 09/15/26 | 6.2 | 6.2 |
|
31.2 |
RPL10.W3B.FE.011251 |
RPL10.Conn EF1B<>NS4.CFD1 (P2-3) Pull Fiber Trunk (384F) [EF<>SSW] | EF1B<>NS4.1 (P2-3) [EF<>SSW] | Not Started | 09/09/26 | 09/09/26 | 1.2 | 1.2 |
|
75.0 |
RPL10.W3B.FE.011371 |
RPL10.Conn EF2B<>NS4.CFD1 (P1-4) Pull Fiber Trunk (384F) [EF<>SSW] | EF2B<>NS4.1 (P1-4) [EF<>SSW] | Not Started | 09/09/26 | 09/10/26 | 2.5 | 2.5 |
|
68.8 |
RPL10.WP3A.EF1F.1070 |
RPL10.Conn EF1F(OPE)<>EF2F(MBOX) Pull/Install/Test OSP Cabling (for RPL06) - P3 | EF1F<>EF2F | Not Started | 09/09/26 | 09/18/26 | 10.0 | 10.0 |
|
171.2 |
RPL10.WP3A.EF2B.1025 |
RPL10.Conn EF2B(OPE)<>EF1F(MBOX) Pull/Install/Test OSP Cabling (for RPL09) - P2 | EF2B<>EF1F | Not Started | 09/09/26 | 09/22/26 | 12.5 | 12.5 |
|
153.8 |
RPL10.WP3B.FE.02240 |
RPL10.Conn EF2B<>NS4.CFD1 (P1-4) Pull/Install/Test - WBS Summary | EF2B<>NS4.1 (P1-4) [EF<>SSW] | Not Started | 09/09/26 | 09/16/26 | 7.5 | 7.5 |
|
88.8 |
RPL10.WP3B.FE.02280 |
RPL10.Conn EF1B<>NS4.CFD1 (P2-3) Pull/Install/Test - WBS Summary | EF1B<>NS4.1 (P2-3) [EF<>SSW] | Not Started | 09/09/26 | 09/22/26 | 12.5 | 12.5 |
|
88.8 |
RPL10.WP3B.FE.08120 |
RPL10.Conn EF1B<>NS2.CFD3 (P2-3) Pull/Install/Test - WBS Summary | EF1B<>NS2.4 (P2-3) [EF<>JXSW] | Not Started | 09/09/26 | 10/07/26 | 26.2 | 26.2 |
|
27.5 |
RPL10.WP4.018180 |
RPL10.Conn NS2.CFD5.15 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/09/26 | 09/10/26 | 2.5 | 2.5 |
|
111.2 |
RPL10.WP4.018340 |
RPL10.Conn NS2.CFD5.48<>31-35 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 09/09/26 | 09/10/26 | 2.5 | 2.5 |
|
106.2 |
RPL10.WP4.031220 |
RPL10.Conn NS3.CFD3.48<>03-05 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/09/26 | 09/10/26 | 2.5 | 2.5 |
|
163.8 |
RPL10.WP4.06700 |
RPL10.Conn NS4.CFD1.48<>36-40 Pull Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 09/09/26 | 09/11/26 | 3.8 | 3.8 |
|
207.5 |
RPL10.WP4.09040 |
RPL10.Conn NS1.CFD4 Pull/Install/Test Trunk (192F) [MA<>JXSW] | Pull/Install Trunk & Multidrop Cable | Not Started | 09/09/26 | 09/22/26 | 12.5 | 12.5 |
|
92.5 |
RPL10.WP4.NS3.01920 |
RPL10.Conn NS3.CFD3 Network - WBS Summary | Network | Not Started | 09/09/26 | 02/29/28 | 457.5 | 457.5 |
|
293.8 |
GCD.RPL10.4265 |
[RPL10] TC Ready: Production Cabling Pathways Complete [NS4 Rows 9-16] | TC Ready: Production Cabling - NS4 | Not Started | 09/10/26 | 09/10/26 | 0.0 | 0.0 |
|
75.0 |
RPL10.3B.FE.1F.22.-3 |
Install Ext. Trunk (288F) EF1F<>NS2.CFD2 (P2-3) [SSW<>JXSW] (( AI SCOPE)) (RPL1) | Cabling (ISP) P2&3 | Not Started | 09/10/26 | 09/17/26 | 7.5 | 7.5 |
|
455.0 |
RPL10.3B.FE.1F.23.2. |
Test Ext. Trunk (288F) EF1F<>NS2.CFD3 (P2-3) [SSW<>JXSW] (( AI SCOPE)) (RPL1) | Cabling (ISP) P2&3 | Not Started | 09/10/26 | 09/17/26 | 7.5 | 7.5 |
|
455.0 |
RPL10.3B.FE.1F.24.-2 |
Pull Ext. Trunk (288F) EF1F<>NS2.CFD4 (P1-4) [SSW<>JXSW] (( AI SCOPE)) (RPL1) | Cabling (ISP) P1&4 | Not Started | 09/10/26 | 09/15/26 | 5.0 | 5.0 |
|
343.8 |
RPL10.4.FE.1F.24.2.1 |
Pull/Install Multi-Drop (288F) NS2.CFD4 (P2-3) [SSW<>JXSW] (( AI SCOPE)) (RPL1) | Pull/Install Trunk & Multidrop Cable | Not Started | 09/10/26 | 09/15/26 | 5.0 | 5.0 |
|
483.8 |
RPL10.CX.NS1.01200 |
RPL10.CX.NS1 - L3/L4 - Remaining Electrical Equipment (Fire Alarm, Security, Lighting) | NS1 ELECTRICAL | Not Started | 09/10/26 | 09/30/26 | 18.8 | 18.8 |
|
61.2 |
RPL10.EY.EF2.01510 |
RPL10.EY.EF2 - FSP3 - Install Interior Electrical Rough and Lighting | Fiber Support Platform - RPL-3 | Not Started | 09/10/26 | 09/21/26 | 10.0 | 10.0 |
|
190.0 |
RPL10.INT.NS3.01360 |
RPL10.Interior.NS3 - Control Fault Domain 2 SQ8.2 - Install Mechanical Side Aisle Cable Tray | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/10/26 | 10/07/26 | 25.0 | 25.0 |
|
3.8 |
RPL10.INT.NS3.01420 |
RPL10.Interior.NS3 - Control Fault Domain 3 SQ9.2 - Install Vesda / FA | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/10/26 | 10/07/26 | 25.0 | 25.0 |
|
87.5 |
RPL10.INT.NS3.01430 |
RPL10.Interior.NS3 - Control Fault Domain 3 SQ9.2 - Install FW | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/10/26 | 10/07/26 | 25.0 | 25.0 |
|
17.5 |
RPL10.INT.NS3.02030 |
RPL10.Interior.NS3 - Control Fault Domain 3 SQ9.2 - Install TW | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/10/26 | 10/07/26 | 25.0 | 25.0 |
|
17.5 |
RPL10.INT.NS3.02660 |
RPL10.Interior.NS3 - OFE - Control Fault Domain 3 SQ9.2 (Mech Side Aisle) | OFE NS3 Control Fault Domain 3 | Not Started | 09/10/26 | 09/21/26 | 10.0 | 10.0 |
|
17.5 |
RPL10.INT.NS3.02900 |
RPL10.Interior.NS3 - Control Fault Domain 3 SQ9.2 - Install Duct (MES Side) | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/10/26 | 10/07/26 | 25.0 | 25.0 |
|
17.5 |
RPL10.SSBC.BB.3075 |
RPL10.Ext.Build Back.SSB-Corr - LO #2 - Install Exterior Backing, In Wall | Build Back Exterior Leave Out Wall #2 (Tent Area) | Not Started | 09/10/26 | 09/15/26 | 5.0 | 5.0 |
|
51.2 |
RPL10.W3B.FE.011516 |
RPL10.Conn EF2F<>NS2.CFD2 (P1-4) Pull Fiber Trunk (288F) [EF<>JXSW] | EF2F<>NS2.5 (P1-4) [EF<>JXSW] | Not Started | 09/10/26 | 09/14/26 | 3.8 | 3.8 |
|
55.0 |
RPL10.W3B.FE.011651 |
RPL10.Conn EF1F<>NS4.CFD1 (P2-3) Pull Fiber Trunk (384F) [EF<>SSW] | EF1F<>NS4.1 (P2-3) [EF<>SSW] | Not Started | 09/10/26 | 09/10/26 | 1.2 | 1.2 |
|
76.2 |
RPL10.W3B.FE.011701 |
RPL10.Conn EF2F<>NS1.CFD2 (P1-4) Pull Fiber Trunk (384F) [EF<>SSW] | EF2F<>NS1.5 (P1-4) [EF<>SSW] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
48.8 |
RPL10.W3B.FE.012226 |
RPL10.Conn EF1F<>NS2.CFD4 (P2-3) Install Fiber Trunk (288F) [EF<>JXSW] | EF1F<>NS2.3 (P2-3) [EF<>JXSW] | Not Started | 09/10/26 | 09/14/26 | 3.8 | 3.8 |
|
21.2 |
RPL10.W3B.FE.012801 |
RPL10.Conn EF1B<>NS2.CFD4 (P2-3) Test Fiber Trunk (384F) [EF<>SSW] | EF1B<>NS2.3 (P2-3) [EF<>SSW] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
32.5 |
RPL10.WP2.GSIDF.4400 |
RPL10.Conn GSIDFNX03 - FacNet Live | Network | Not Started | 09/10/26 | 09/10/26 | 0.0 | 0.0 |
|
617.0 |
RPL10.WP2.GSIDF.4540 |
RPL10.Conn GSIDFNX04 - FacNet Live | Network | Not Started | 09/10/26 | 09/10/26 | 0.0 | 0.0 |
|
617.0 |
RPL10.WP2.GSIDF.4980 |
RPL10.Conn GSIDFNX08 - CorpNet/FacNet Ready (Rack & Stack Active Gear Complete) | Network | Not Started | 09/10/26 | 09/10/26 | 0.0 | 0.0 |
|
602.0 |
RPL10.WP2.GSIDF.5120 |
RPL10.Conn GSIDFNX09 - CorpNet/FacNet Ready (Rack & Stack Active Gear Complete) | Network | Not Started | 09/10/26 | 09/10/26 | 0.0 | 0.0 |
|
602.0 |
RPL10.WP3A.EF2B.1085 |
RPL10.Conn EF2B(LIU)<>EF1F(MBOX) Pull/Install/Test OSP Cabling (for RPL05) - P2 | EF2B<>EF2F | Not Started | 09/10/26 | 09/17/26 | 7.5 | 7.5 |
|
137.5 |
RPL10.WP3A.EF2F.1010 |
RPL10.Conn EF2F(LIU)<>EF1F(MBOX) Pull/Install/Test OSP Cabling (for RPL03) - P3 | EF2F<>EF1F | Not Started | 09/10/26 | 09/21/26 | 10.0 | 10.0 |
|
130.0 |
RPL10.WP3A.EF2F.1100 |
RPL10.Conn EF2F(OPE)<>EF2F(MBOX) Pull/Install/Test OSP Cabling (for RPL08) - P1 | EF2F<>EF2F | Not Started | 09/10/26 | 09/15/26 | 5.0 | 5.0 |
|
170.0 |
RPL10.WP3B.FE.02260 |
RPL10.Conn EF1F<>NS4.CFD1 (P2-3) Pull/Install/Test - WBS Summary | EF1F<>NS4.1 (P2-3) [EF<>SSW] | Not Started | 09/10/26 | 09/24/26 | 13.8 | 13.8 |
|
88.8 |
RPL10.WP3B.FE.08760 |
RPL10.Conn EF2F<>NS1.CFD2 (P1-4) Pull/Install/Test - WBS Summary | EF2F<>NS1.5 (P1-4) [EF<>SSW] | Not Started | 09/10/26 | 10/21/26 | 37.5 | 37.5 |
|
21.2 |
RPL10.WP3B.FE.09040 |
RPL10.Conn EF2F<>NS2.CFD2 (P1-4) Pull/Install/Test - WBS Summary* | EF2F<>NS2.5 (P1-4) [EF<>JXSW] | Not Started | 09/10/26 | 10/28/26 | 43.8 | 43.8 |
|
23.8 |
RPL10.WP4.011440 |
RPL10.Conn NS1.CFD6 Pull/Install In-Rack Fanout (LC<>MMC) [MA<>EB] | [MA<>EB] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
66.2 |
RPL10.WP4.011860 |
RPL10.Conn NS1.CFD3 Pull/Install/Test Multidrop Cable (288F) [EF<>JXSW] | Pull/Install Trunk & Multidrop Cable | Not Started | 09/10/26 | 09/17/26 | 7.5 | 7.5 |
|
83.8 |
RPL10.WP4.016560 |
RPL10.Conn NS1.CFD4.17 Install (A-End/Passive) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install (A-End/Passive) Duplex Jumper [MA<>JXSW] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
83.8 |
RPL10.WP4.016720 |
RPL10.Conn NS1.CFD4.48<>03-05 Install (A-End/Passive) Duplex Jumper (LC<>LC) [RSW<>FSW] | Install (A-End/Passive) Duplex Jumper [RSW<>FSW] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
78.8 |
RPL10.WP4.030000 |
RPL10.Conn NS4.CFD2.48<>46-49 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/10/26 | 09/10/26 | 1.2 | 1.2 |
|
187.5 |
RPL10.WP4.030280 |
RPL10.Conn NS4.CFD4.48<>16-20 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/10/26 | 09/15/26 | 5.0 | 5.0 |
|
162.5 |
RPL10.WP4.030900 |
RPL10.Conn NS3.CFD1.48<>21-25 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/10/26 | 09/15/26 | 5.0 | 5.0 |
|
180.0 |
RPL10.WP4.031200 |
RPL10.Conn NS3.CFD2.48<>46-49 Prefab Duplex Jumper (LC<>LC) [RSW<>FSW] | Prefab | Not Started | 09/10/26 | 09/10/26 | 1.2 | 1.2 |
|
200.0 |
RPL10.WP4.032320 |
RPL10.Conn NS1.CFD4.24 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
101.2 |
RPL10.WP4.032400 |
RPL10.Conn NS1.CFD3.28 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
91.2 |
RPL10.WP4.032780 |
RPL10.Conn NS2.CFD5.15 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
110.0 |
RPL10.WP4.032860 |
RPL10.Conn NS2.CFD4.19 Install (Z-End/Active) Duplex Jumper (LC<>LC) [MA<>JXSW] | Install Duplex Jumper [MA<>JXSW] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
100.0 |
RPL10.WP4.06720 |
RPL10.Conn NS4.CFD1.48<>41-44 Pull Duplex Jumper (LC<>LC) [RSW<>FSW] | Pull Duplex Jumper [RSW<>FSW] | Not Started | 09/10/26 | 09/11/26 | 2.5 | 2.5 |
|
210.0 |
RPL10.WP4.09720 |
RPL10.Conn NS1.CFD6.46<>04 Pull/Install Trunk (384F) [MA<>EB] | [MA<>EB] | Not Started | 09/10/26 | 09/15/26 | 5.0 | 5.0 |
|
60.0 |
RPL10.WP4.NS2.03140 |
RPL10.Conn NS2.CFD2 Network Suite [JXSW<>MA] Multi Drop Cable | Pre ORv3 Rack | Not Started | 09/10/26 | 09/21/26 | 10.0 | 10.0 |
|
65.0 |
RPL10.WP4.NS4.01060 |
RPL10.Conn NS4.CFD1 Infrastructure - WBS Summary | Infrastructure | Not Started | 09/10/26 | 09/23/26 | 12.5 | 12.5 |
|
97.5 |
RPL10.WP4.NS4.01140 |
RPL10.Conn NS4.CFD1 Infrastructure | Infrastructure | Not Started | 09/10/26 | 09/23/26 | 12.5 | 12.5 |
|
97.5 |
RPL10.3B.FE.1F.42.-4 |
Pull Ext. Trunk (288F) EF1F<>NS4.CFD2 (P2-3) [SSW<>JXSW] (( AI SCOPE)) (RPL1) | Cabling (ISP) P2&3 | Not Started | 09/11/26 | 09/16/26 | 5.0 | 5.0 |
|
356.2 |
RPL10.CBL.NIDF.03030 |
RPL10.Conn NS4.CFD2 (FE) ISP Cabling - WBS Summary | FENW (Front End Network) | Not Started | 09/11/26 | 01/10/28 | 412.5 | 412.5 |
|
288.8 |
RPL10.CX.NS1.01210 |
RPL10.CX.NS1 - L3/L4 - Remaining Mechanical Equipment (CU/CRAH) | NS1 MECHANICAL | Not Started | 09/11/26 | 10/08/26 | 25.0 | 25.0 |
|
61.2 |
RPL10.CX.NS4.01050 |
RPL10.CX.NS4 - L3/L4 - House Power (for mechainical) | NS4 HOUSE POWER | Not Started | 09/11/26 | 09/24/26 | 12.5 | 12.5 |
|
80.0 |
RPL10.Conn.MS.01410 |
Wifi Ready - NS1 | Connectivity Milestones | Not Started | 09/11/26 | 09/11/26 | 0.0 | 0.0 |
|
387.5 |
RPL10.Conn.MS.02150 |
FacNet Ready @ NS2 IDFs | Connectivity Milestones | Not Started | 09/11/26 | 09/11/26 | 0.0 | 0.0 |
|
761.2 |
RPL10.EY.NS2.01400 |
RPL10.EY.NS2 - Cure for Remaining Equipment Pads (High Early Mix) | Build Back Exterior Leave Out Wall #2 (Tent Area) | Not Started | 09/11/26 | 09/17/26 | 8.8 | 8.8 |
|
65.0 |
RPL10.INT.NS3.01340 |
RPL10.Conn NS3.CFD2 - Set Passive Racks for WP3B | Infrastructure | Not Started | 09/11/26 | 09/15/26 | 3.8 | 3.8 |
|
71.2 |
RPL10.INT.NS3.03000 |
RPL10.Conn NS3.CFD2 - Set Passive Racks for PON | Infrastructure | Not Started | 09/11/26 | 09/15/26 | 3.8 | 3.8 |
|
181.2 |
RPL10.INT.NS4.01640 |
RPL10.Interior.NS4 - Control Fault Domain 4 SQ10.1 - Install Mechanical Side Aisle Cable Tray | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/11/26 | 10/08/26 | 25.0 | 25.0 |
|
93.8 |
RPL10.INT.NS4.01660 |
RPL10.Interior.NS4 - Control Fault Domain 4 SQ10.1 - Install copper from GS.IDF to BMS and EPMS panels (UG from Center I | Remaining Tie-ins post Mech Side Aisle install | Not Started | 09/11/26 | 10/08/26 | 25.0 | 25.0 |
|
103.8 |
RPL10.INT.NS4.02760 |
RPL10.Interior.NS4 - OFE - Control Fault Domain 5 SQ11.1 (Mech Side Aisle) | OFE NS4 Control Fault Domain 5 | Not Started | 09/11/26 | 09/22/26 | 10.0 | 10.0 |
|
91.2 |
RPL10.SSBC.BB.1645 |
RPL10.Ext.Build Back.SSB-Corr - LO #1 - Hang Exterior & GS MDF Mechanical Drywall | Build Back Exterior Leave Out Wall #1 (Tent Area) | Not Started | 09/11/26 | 09/16/26 | 5.0 | 5.0 |
|
57.5 |
RPL10.W3B.FE.011771 |
RPL10.Conn EF2F<>NS4.CFD1 (P1-4) Pull Fiber Trunk (384F) [EF<>SSW] | EF2F<>NS4.1 (P1-4) [EF<>SSW] | Not Started | 09/11/26 | 09/14/26 | 2.5 | 2.5 |
|
68.8 |